Adding vehicle problem

[USman]

Hello here is my problem:

I follow hoppah's tut on adding vehicles and searched the fourm for a solution, but no help. when I get it in the editor it says prototype missing and is a box. I check the V3O and its blank. How do I get the info in it? If I have to do it mannualy how do I put it in? I can provide more info if you need it.

Thanks in advance, USman

[Xplorer4x4]

you have to name the v3o EXACTLY the same as the name that shows up in the left column.

http://img210.imageshack.us/img210/7546/zmodeler220101219205334.jpg

See how it says crown? I think you have to export it has crown.v3o, you can edit the name on the left colum where it says crown to say LAPD_CV for example, then export it as LAPD_CV.v3o. You could also export it the first way, then open the v3o and edit the model name like you do for a reskin. Hope that helps.

[USman]

Thanks! that is what the problem was!

USman

[Xplorer4x4]

No problem, I sometimes forget, then when i see the v3o empty i realize what I did wrong!

[MikeyPI]

The way i do it so that I don't accidentally do this, is to use the multiple export feature of zmod, simply hit the drop down next to the export button and pick multi export... Every obj in the Zmod file will be dumped appropriately named V3Os.

[Xplorer4x4]

So..Very good tip Mike, thanks!