drbauss96 Posted May 11, 2012 Report Share Posted May 11, 2012 When I use the firefighter to deploy gateways it works fine and I'm able to use two hoses with the split but the issue is when the fire is out and when I go to pick up the gateways. The gateway disappears but the hose that was connected to it lays on the ground. None of my firefighters or anyone can pick it up and it causes the truck the hose is attached to to not move because it's hooked up to the hose. Am I doing something wrong or is it just a glitch? Quote Link to comment Share on other sites More sharing options...
Penates Posted June 3, 2012 Report Share Posted June 3, 2012 Once you have disconnected the 2 connected hoses from the gateway, simply use a firefighter with empty hands & click on the gateway (should show "hand" cursor;This will revert the FF back to holding the hose, just use r-click or the "dettach hose" command & the FF will roll the hose up.Hope this helpsPen Quote Link to comment Share on other sites More sharing options...
drbauss96 Posted June 6, 2012 Author Report Share Posted June 6, 2012 Thanks! Quote Link to comment Share on other sites More sharing options...
drbauss96 Posted June 9, 2012 Author Report Share Posted June 9, 2012 Yeah anyway so it works some of the times that I pick it up. Others it leaves the firehouse on the ground and the truck is just stuck there so I have to shoot it and then pick it up with a rollback truck... Quote Link to comment Share on other sites More sharing options...
Guest nbrown8568 Posted June 9, 2012 Report Share Posted June 9, 2012 The wye gateway has been a long standing issue in a lot of the mods. Maybe someday it will be solved, but until then a lot of us don't use it.Norm, Quote Link to comment Share on other sites More sharing options...
